havoc420ubuntu
bffcd973e0
- Updated task_1.py to replace turn_degree_twice calls with turn_degree_v2 for improved rotation accuracy. - Modified task_2.py to utilize turn_degree_v2 for enhanced turning capabilities and adjusted movement parameters for better path execution. - Refined go_to_xy parameters in task_2 to optimize navigation and added additional logging for debugging purposes.
268 lines
10 KiB
Python
268 lines
10 KiB
Python
import math
|
||
import time
|
||
import sys
|
||
import os
|
||
|
||
sys.path.append(os.path.dirname(os.path.dirname(os.path.abspath(__file__))))
|
||
from utils.localization_lcmt import localization_lcmt
|
||
from utils.log_helper import LogHelper, get_logger, section, info, debug, warning, error, success, timing
|
||
from base_move.turn_degree import turn_degree, turn_degree_twice
|
||
from base_move.go_straight import go_straight
|
||
|
||
# 创建本模块特定的日志记录器
|
||
logger = get_logger("坐标移动")
|
||
|
||
def go_to_xy(ctrl, msg, target_x, target_y, speed=0.5, precision=True, observe=False):
|
||
"""
|
||
控制机器人移动到指定的(x,y)坐标位置，使用直接xy速度控制
|
||
|
||
参数:
|
||
ctrl: Robot_Ctrl 对象，包含里程计信息
|
||
msg: robot_control_cmd_lcmt 对象，用于发送命令
|
||
target_x: 目标X坐标(米)
|
||
target_y: 目标Y坐标(米)
|
||
speed: 行走速度(米/秒)，范围0.1~1.0，默认为0.5
|
||
precision: 是否使用高精度模式（更慢速度），默认为True
|
||
observe: 是否输出中间状态信息，默认为False
|
||
|
||
返回:
|
||
bool: 是否成功完成移动到目标位置
|
||
"""
|
||
# 获取当前位置
|
||
current_position = ctrl.odo_msg.xyz
|
||
current_x, current_y = current_position[0], current_position[1]
|
||
|
||
if observe:
|
||
section('目标点导航', "开始")
|
||
info(f"当前位置: ({current_x:.3f}, {current_y:.3f})", "位置")
|
||
info(f"目标位置: ({target_x:.3f}, {target_y:.3f})", "目标")
|
||
# 在起点放置标记
|
||
if hasattr(ctrl, 'place_marker'):
|
||
ctrl.place_marker(current_x, current_y,
|
||
current_position[2] if len(current_position) > 2 else 0.0,
|
||
'blue', observe=True)
|
||
# 在目标点放置标记
|
||
if hasattr(ctrl, 'place_marker'):
|
||
ctrl.place_marker(target_x, target_y, 0.0, 'green', observe=True)
|
||
|
||
# 计算与目标点的距离和角度
|
||
dx = target_x - current_x
|
||
dy = target_y - current_y
|
||
distance = math.sqrt(dx*dx + dy*dy)
|
||
|
||
# 如果已经非常接近目标，无需移动
|
||
if distance < 0.05: # 5厘米以内视为已达到
|
||
if observe:
|
||
success("已处于目标位置附近，无需移动", "完成")
|
||
return True
|
||
|
||
if observe:
|
||
info(f"到目标点的距离: {distance:.3f}米", "路径")
|
||
|
||
# 限制速度范围
|
||
max_speed = min(max(abs(speed), 0.1), 1.0)
|
||
if precision:
|
||
max_speed = min(max_speed, 0.5) # 高精度模式下限制最大速度
|
||
|
||
# 根据距离动态调整速度
|
||
if distance > 1.0:
|
||
actual_speed = max_speed
|
||
elif distance > 0.5:
|
||
actual_speed = max_speed * 0.8
|
||
elif distance > 0.2:
|
||
actual_speed = max_speed * 0.6
|
||
else:
|
||
actual_speed = max_speed * 0.4
|
||
|
||
# 设置移动命令基本参数
|
||
msg.mode = 11 # Locomotion模式
|
||
msg.gait_id = 26 # 自变频步态
|
||
msg.step_height = [0.06, 0.06] # 抬腿高度
|
||
|
||
# 估算移动时间，但实际上会通过里程计控制
|
||
estimated_time = distance / actual_speed
|
||
timeout = estimated_time + 5 # 增加超时时间为预计移动时间加5秒
|
||
|
||
# 监控移动过程
|
||
start_time = time.time()
|
||
position_check_interval = 0.05 # 位置检查间隔(秒)
|
||
last_check_time = start_time
|
||
last_distance = distance
|
||
stall_count = 0
|
||
|
||
if observe:
|
||
info(f"开始移动，预计用时 {estimated_time:.2f}秒", "移动")
|
||
|
||
# 监控移动到达目标点
|
||
while time.time() - start_time < timeout:
|
||
current_time = time.time()
|
||
|
||
# 按固定间隔检查位置，减少计算负担
|
||
if current_time - last_check_time >= position_check_interval:
|
||
# 获取当前位置
|
||
current_position = ctrl.odo_msg.xyz
|
||
current_x, current_y = current_position[0], current_position[1]
|
||
|
||
# 计算新的位移向量和距离
|
||
dx = target_x - current_x
|
||
dy = target_y - current_y
|
||
current_distance = math.sqrt(dx*dx + dy*dy)
|
||
|
||
# 判断是否已经足够接近目标
|
||
if current_distance < 0.05: # 5厘米以内视为已达到
|
||
break
|
||
|
||
# 计算移动进度
|
||
progress = 1.0 - (current_distance / distance)
|
||
|
||
# 检测是否卡住（距离变化很小）
|
||
distance_change = last_distance - current_distance
|
||
if abs(distance_change) < 0.005: # 变化小于5毫米
|
||
stall_count += 1
|
||
if stall_count > 20: # 连续多次检测到几乎没有移动
|
||
if observe:
|
||
warning("检测到机器人可能卡住，调整策略", "移动")
|
||
# 可能是卡住了，稍微增加速度
|
||
actual_speed = min(actual_speed * 1.2, max_speed)
|
||
stall_count = 0
|
||
else:
|
||
stall_count = 0
|
||
|
||
# 动态调整速度，接近目标时减速
|
||
if current_distance < 0.2: # 接近目标时减速
|
||
target_speed = max_speed * 0.3
|
||
elif current_distance < 0.5:
|
||
target_speed = max_speed * 0.5
|
||
else:
|
||
target_speed = actual_speed
|
||
|
||
# 计算速度分量，归一化后乘以目标速度
|
||
speed_factor = target_speed / current_distance if current_distance > 0 else 0
|
||
vel_x = dx * speed_factor
|
||
vel_y = dy * speed_factor
|
||
|
||
# 更新速度命令
|
||
msg.vel_des = [vel_x, vel_y, 0] # [前进速度, 侧向速度, 角速度]
|
||
msg.duration = 0 # 持续执行直到下一个命令
|
||
msg.life_count = (msg.life_count + 1) % 127 # 防止溢出，确保life_count在int8_t范围内
|
||
ctrl.Send_cmd(msg)
|
||
|
||
if observe and (current_time - start_time) % 1.0 < position_check_interval:
|
||
debug(f"当前位置: ({current_x:.3f}, {current_y:.3f}), 剩余距离: {current_distance:.3f}米, 完成: {progress*100:.1f}%", "移动")
|
||
debug(f"速度: x={vel_x:.2f}, y={vel_y:.2f}", "速度")
|
||
|
||
last_check_time = current_time
|
||
last_distance = current_distance
|
||
|
||
time.sleep(0.01) # 小间隔检查位置
|
||
|
||
# 平滑停止
|
||
if hasattr(ctrl.base_msg, 'stop_smooth'):
|
||
ctrl.base_msg.stop_smooth()
|
||
else:
|
||
ctrl.base_msg.stop()
|
||
|
||
# 获取最终位置并计算与目标的误差
|
||
final_position = ctrl.odo_msg.xyz
|
||
final_x, final_y = final_position[0], final_position[1]
|
||
final_dx = target_x - final_x
|
||
final_dy = target_y - final_y
|
||
final_distance = math.sqrt(final_dx*final_dx + final_dy*final_dy)
|
||
|
||
if observe:
|
||
info(f"最终位置: ({final_x:.3f}, {final_y:.3f})", "位置")
|
||
info(f"与目标的距离误差: {final_distance:.3f}米", "误差")
|
||
# 在终点放置标记
|
||
if hasattr(ctrl, 'place_marker'):
|
||
ctrl.place_marker(final_x, final_y,
|
||
final_position[2] if len(final_position) > 2 else 0.0,
|
||
'red', observe=True)
|
||
|
||
# 判断是否成功到达目标点（误差在10厘米以内）
|
||
nav_success = final_distance < 0.1
|
||
|
||
if observe:
|
||
if nav_success:
|
||
success(f"成功到达目标点，误差: {final_distance:.3f}米", "成功")
|
||
else:
|
||
warning(f"未能精确到达目标点，误差: {final_distance:.3f}米", "警告")
|
||
|
||
return nav_success
|
||
|
||
def go_to_xy_with_correction(ctrl, msg, target_x, target_y, speed=0.5, precision=True,
|
||
max_attempts=2, observe=False):
|
||
"""
|
||
控制机器人移动到指定的(x,y)坐标位置，并在必要时进行路径修正
|
||
|
||
参数:
|
||
ctrl: Robot_Ctrl 对象，包含里程计信息
|
||
msg: robot_control_cmd_lcmt 对象，用于发送命令
|
||
target_x: 目标X坐标(米)
|
||
target_y: 目标Y坐标(米)
|
||
speed: 行走速度(米/秒)，范围0.1~1.0，默认为0.5
|
||
precision: 是否使用高精度模式，默认为True
|
||
max_attempts: 最大尝试次数，默认为2
|
||
observe: 是否输出中间状态信息，默认为False
|
||
|
||
返回:
|
||
bool: 是否成功完成移动到目标位置
|
||
"""
|
||
attempt = 1
|
||
|
||
while attempt <= max_attempts:
|
||
if observe:
|
||
section(f'导航尝试 {attempt}/{max_attempts}', "开始")
|
||
|
||
# 执行基本导航
|
||
success = go_to_xy(ctrl, msg, target_x, target_y, speed, precision, observe)
|
||
|
||
if success:
|
||
return True
|
||
|
||
# 如果导航失败且还有尝试次数，进行修正
|
||
if attempt < max_attempts:
|
||
if observe:
|
||
warning(f"第{attempt}次导航未达到预期精度，尝试修正", "修正")
|
||
|
||
# 获取当前位置
|
||
current_position = ctrl.odo_msg.xyz
|
||
current_x, current_y = current_position[0], current_position[1]
|
||
|
||
# 计算与目标点的距离和角度
|
||
dx = target_x - current_x
|
||
dy = target_y - current_y
|
||
distance = math.sqrt(dx*dx + dy*dy)
|
||
|
||
# 如果距离很近但未达到成功标准，可能是卡住了
|
||
if distance < 0.2: # 20厘米以内
|
||
if observe:
|
||
info(f"距离目标很近 ({distance:.3f}米)，使用更高精度方式移动", "策略")
|
||
# 使用更慢的速度和更高的精度
|
||
speed = speed * 0.6
|
||
precision = True
|
||
|
||
attempt += 1
|
||
|
||
# 获取最终位置并计算与目标的误差
|
||
final_position = ctrl.odo_msg.xyz
|
||
final_x, final_y = final_position[0], final_position[1]
|
||
final_dx = target_x - final_x
|
||
final_dy = target_y - final_y
|
||
final_distance = math.sqrt(final_dx*final_dx + final_dy*final_dy)
|
||
|
||
if observe:
|
||
if final_distance < 0.2:
|
||
warning(f"虽未达到精确目标，但已在目标附近 ({final_distance:.3f}米)", "部分成功")
|
||
else:
|
||
error(f"多次尝试后仍未能达到目标点，最终误差: {final_distance:.3f}米", "失败")
|
||
|
||
return False
|
||
|
||
# 用法示例
|
||
if __name__ == "__main__":
|
||
# 这里是示例代码，实际使用时需要提供合适的ctrl和msg对象
|
||
# 移动到坐标(1.0, 2.0)
|
||
# go_to_xy(ctrl, msg, 1.0, 2.0, speed=0.5, observe=True)
|
||
# 移动到坐标(0.0, 0.0)并自动修正
|
||
# go_to_xy_with_correction(ctrl, msg, 0.0, 0.0, speed=0.4, observe=True)
|
||
pass |