mi-task/test/base_move/go_straight/main.py

'''
This demo show the communication interface of MR813 motion control board based on Lcm.
Dependency: 
- robot_control_cmd_lcmt.py
- robot_control_response_lcmt.py
'''
import lcm
import sys
import os
import time
from threading import Thread, Lock

from robot_control_cmd_lcmt import robot_control_cmd_lcmt
from robot_control_response_lcmt import robot_control_response_lcmt

def main():
    Ctrl = Robot_Ctrl()
    Ctrl.run()
    msg = robot_control_cmd_lcmt()
    try:
        print("Recovery stand")

        msg.mode = 12 # Recovery stand
        msg.gait_id = 0
        msg.life_count += 1 # Command will take effect when life_count update
        Ctrl.Send_cmd(msg)
        Ctrl.Wait_finish(12, 0)

        # def circle_90(ctrl, msg, direction="right"):
        #     msg.mode = 11
        #     msg.gait_id = 26
        #     msg.duration = 1000
        #     msg.vel_des = [0.0, 0.0, -1.9 if direction == "right" else 1]
        #     msg.life_count += 1
        #     ctrl.Send_cmd(msg)
        #     time.sleep(1)

        # circle_90(Ctrl, msg)
        # return True

        # TAG 设置机器人头部朝下
        # msg.mode = 21  # 位置插值控制
        # msg.gait_id = 0
        # # msg.rpy_des = [0, -0.3, 0]  # 头部朝下
        # msg.rpy_des = [0, 0, 0]
        # msg.pos_des = [0, 0, 0.2]
        # msg.duration = 400  # 期望执行时间，0.3秒
        # msg.life_count += 1
        # Ctrl.Send_cmd(msg)
        # time.sleep(1)

        print("Go forward")

        msg.mode = 11
        msg.gait_id = 3
        msg.vel_des = [1, 0, 0]
        # msg.rpy_des = [0, -0.3, 0]
        msg.duration = 20000
        msg.step_height = [0.03, 0.03]
        msg.life_count += 1
        Ctrl.Send_cmd(msg)
        Ctrl.Wait_finish(11, msg.gait_id)

    except KeyboardInterrupt:
        pass
    Ctrl.quit()
    sys.exit()


class Robot_Ctrl(object):
    def __init__(self):
        self.rec_thread = Thread(target=self.rec_responce)
        self.send_thread = Thread(target=self.send_publish)
        self.lc_r = lcm.LCM("udpm://239.255.76.67:7670?ttl=255")
        self.lc_s = lcm.LCM("udpm://239.255.76.67:7671?ttl=255")
        self.cmd_msg = robot_control_cmd_lcmt()
        self.rec_msg = robot_control_response_lcmt()
        self.send_lock = Lock()
        self.delay_cnt = 0
        self.mode_ok = 0
        self.gait_ok = 0
        self.runing = 1

    def run(self):
        self.lc_r.subscribe("robot_control_response", self.msg_handler)
        self.send_thread.start()
        self.rec_thread.start()

    def msg_handler(self, channel, data):
        self.rec_msg = robot_control_response_lcmt().decode(data)
        if(self.rec_msg.order_process_bar >= 95):
            self.mode_ok = self.rec_msg.mode
        else:
            self.mode_ok = 0

    def rec_responce(self):
        while self.runing:
            self.lc_r.handle()
            time.sleep( 0.002 )

    def Wait_finish(self, mode, gait_id):
        count = 0
        while self.runing and count < 2000: #10s
            if self.mode_ok == mode and self.gait_ok == gait_id:
                return True
            else:
                time.sleep(0.005)
                count += 1

    def send_publish(self):
        while self.runing:
            self.send_lock.acquire()
            if self.delay_cnt > 20: # Heartbeat signal 10HZ, It is used to maintain the heartbeat when life count is not updated
                self.lc_s.publish("robot_control_cmd",self.cmd_msg.encode())
                self.delay_cnt = 0
            self.delay_cnt += 1
            self.send_lock.release()
            time.sleep( 0.005 )

    def Send_cmd(self, msg):
        self.send_lock.acquire()
        self.delay_cnt = 50
        self.cmd_msg = msg
        self.send_lock.release()

    def quit(self):
        self.runing = 0
        self.rec_thread.join()
        self.send_thread.join()

# Main function
if __name__ == '__main__':
    main()